Double Seat Mixproof Valve with Pneumatic Actuator, E-C Series
Reference: SV-5MP-E
Sizes available: 1 1/2" to 4" (DN40-DN100)
End connection: butt-welded, tri-clamp
Body material: AISI 316L
Seat material: EPDM, FDA177.2600
Max. working pressure: 145psi (10bar)
Min. working pressure: absolute vacuum
Temperature range: 14°F to 266°F (-10 to 130°C)
Operation: pneumatic actuator + C-TOP
Actuator air pressure: 79-102 psi (5.5 bar-7 bar)
Internal treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
Unique design: external CIP supply
INQUIRY
Sizes available: 1 1/2" to 4" (DN40-DN100)
End connection: butt-welded, tri-clamp
Body material: AISI 316L
Seat material: EPDM, FDA177.2600
Max. working pressure: 145psi (10bar)
Min. working pressure: absolute vacuum
Temperature range: 14°F to 266°F (-10 to 130°C)
Operation: pneumatic actuator + C-TOP
Actuator air pressure: 79-102 psi (5.5 bar-7 bar)
Internal treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
Unique design: external CIP supply
APPLICATION
The SV-5MP-E series mixing proof valve with external CIP supply, is designed to meet when there are two different product flows through the same valve, both preventing fluid mixing and can also monitoring the fluid working condition.
OPERATING PRINCIPLES
● This valve is normally closed (NC), remotely controlled through compressed air. This valve is companied with two small pneumatic valves, one for monitoring, another one for CIP.
● Plug (upper stem inside of a divert valve) has two seals that form a leakage chamber between each other. The leaked medium flows into the chamber discharge through a detector valve. Supply air to the actuator can make the valve clean in place (see figure 2).
● Under cleaning, fluid flows directly to the plug. This valve is insensitive to the water hammer effect.
FLEXIBLE BODY COMBINATIONS
TECHNICAL DATA
| Product wetted parts | AISI 316L |
| Other stainless steel parts | AISI 304 |
| Seat Material (Default) | EPDM, FDA177.2600 |
| Seat Material (Option) | FPM (Viton), FDA177.2600 |
| End Connections | butt-welded, tri-clamp |
| Max. Working Pressure | 145psi (10bar) |
| Min. working pressure | absolute vacuum |
| Working Temperature | 14°F to 266°F (-10 to 130°C), 284°F (140°C) for short time sterilisation. |
| Internal Finish | Ra 32μin (0.8μm) as default, Ra 16μin (0.4μm) as best. |
| External Finish | sandblast, or others upon request. |
| Pneumatic Actuator Types | Normally Closed (NC) – Air to open and spring to close; Normally Open (NO) – Air to close and spring to open; Air to Air (AA) – Air to open, air to close. |
| Actuator air pressure | 79-102 psi (5.5 bar-7 bar) |
| Units for intelligent control and indication | C-top control IL-top control (Positioner) Electric connection AS-I bus connection |
DESIGN FEATURES
Design Features
● External CIP supply
● Default with normally closed pneumatic actuator
● Compact and robust design, forged spherical bodies
● Pressure balanced design
● One-piece Body & Clamped Body for choose from
● A wide selection of different body combinations.
● Easy disassembly by releasing the clamp
● Cleaning/Sterilization Parts for Options
● 100% hydraulic tested / 100% inspected
Operations
● Actuators
Stainless steel actuator
● Units for intelligent control and indication:
C-top control
IL-top control (Positioner)
Electric connection
AS-I bus connection
Related products