Sanitary Globe Valve with IL-TOP (Intelligent Control)
Reference: SV-6PC-IL
Sizes available: 1/2" - 3" (DN10-DN65)
End connection: butt-welded, tri-clamp, threaded, flanged
Body material: 304 or 316
Seat: PTFE
Max. working pressure: 116psi / 8bar (standard), 145psi / 10bar (option)
Temperature range: -40 to 248°F (-40 to 120°C) as default, higher available upon request
Operation: plastic or stainless steel pneumatic actuator, NC/NO/AA
Actuator air pressure: 58-102psi (4-7bar)
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
IL-TOP (Positioner) control module: locating valve position by setting a value, 4-20MA input signal and the 4-20MA output feedback function.
INQUIRY
Sizes available: 1/2" - 3" (DN10-DN65)
End connection: butt-welded, tri-clamp, threaded, flanged
Body material: 304 or 316
Seat: PTFE
Max. working pressure: 116psi / 8bar (standard), 145psi / 10bar (option)
Temperature range: -40 to 248°F (-40 to 120°C) as default, higher available upon request
Operation: plastic or stainless steel pneumatic actuator, NC/NO/AA
Actuator air pressure: 58-102psi (4-7bar)
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
IL-TOP (Positioner) control module: locating valve position by setting a value, 4-20MA input signal and the 4-20MA output feedback function.
APPLICATION
SV-6PC-IL series is a pneumatic type sanitary globe valve with IL-TOP (Intelligent Control). It is widely used as a switch in the automatic control system for printing, dyeing, bleaching, food-processing, washing, chemical, water treatment, pharmaceutical industries, etc. It featured with water- hammer protection, noise-free, reliable sealing performance characteristics.
TECHNICAL DATA
| Body Material | 304 or 316 |
| Seat Material | PTFE |
| Max. Working Pressure | 116psi / 8bar (standard), 145psi / 10bar (option) |
| Working Temperature | -40 to 248°F (-40 to 120°C) as standard |
| -40 to 356°F (-40 to 180°C) as option | |
| Internal Finish | Ra 16 ~ 32µin (0.4 ~ 0.8µm), Ra 32µin as default. |
| External Finish | Ra 16 ~ 32µin (0.4 ~ 0.8µm), Ra 32µin as default. |
| End Connections | butt-welded, tri-clamp, threaded, flanged, or others upon request. |
| Pneumatic Actuator Types | Normally Closed (NC) – Air to open and spring to close; Normally Open (NO) – Air to close and spring to open; Air to Air (AA) – Air to open, air to close. |
| Actuator air pressure | 58 ~ 102psi (4 ~ 7bar) |
| IL-TOP (Positioner) control module | locating valve position by setting a value, 4-20MA input signal and the 4-20MA output feedback function |
| Units for intelligent control and indication | Proximity Switches (position sensor) Stroke Limiter C-top control IL-top control (Positioner) |
DESIGN FEATURES
Design Features
● 0/4-20mA, 0-5/10V signal input (standard)
● 0/4-20mA, 0-5/10V signal output (option)
● DEVICE NET BUS communication (option)
● Water- hammer protection, noise-free, reliable sealing performance.
● No dead angle, no residue design
● Max. working pressure up to 200℃ (depending on seal material).
● Flexible shaft sealing, embedded trim design.
● Manual handwheel, pneumatic actuator are interchangeable.
● A wide selection of different end connections.
● 100% hydraulic tested / 100% inspected
Operations
● Handles
Plastic handwheel
Stainless steel handwheel
Fine-tuning handwheel
● Actuators
Stainless steel actuator
Plastic actuator
● Units for intelligent control and indication:
Proximity Switches (position sensor)
Stroke Limiter
C-top control
IL-top control (Positioner)
